![]() Short-press changes brightness and long-press cycles through modes. The new ribbon has a touch pad for changing brightness as well as a retro pixel and grayscale mode. The second kit came with same LCD type but a different ribbon cable and maybe a different PCB too. It also would get images burned in from the previous game after reset and show vertical lines on text with a high contrast background (dark text light background). Upon removing the foam insert, the line disappeared. Found that a purple line would display in the middle of the LCD if the foam insert was installed. First kit was strange, it had a noticeable blue-ish hue (appears washed out) compared to other LCD kits. Had an interesting experience with this kit and only moderately satisfied. Please exercise extreme caution when installing. LCD may break if put under too much pressure or dropped.Backlight kits that have been installed are not eligible for replacement or return. If you are unsure how to perform a dry run, please contact our support team and we will be happy to help. All ribbon cables should have no bends or creases in them. This includes the use of adhesives, brackets, and any performed soldering. ![]() A dry run or test fit means the kit is not installed in the shell. Test before installation! When you receive a backlight/LCD kit, you should perform a dry run before installing to assure that nothing has been damaged in transit.If you received an extra lens in your order, this was likely a included plastic lens with a shell and should NOT be placed on top of the pre-adhered lens. Removing pre-adhered lens from LCD can result in damage to the LCD and will void product warranty. You do not need to purchase a separate lens.Doing this will void the product warranty as the LCD may break during this process. You will also have to carefully separate the Lens pre-adhered from the LCD. You can use your original SP Lens, however some of the images on the edge of the LCD screen will be blocked.According to the battery capacity and different game cards, the power consumption may vary. The viewing window for this kit is slightly larger than OEM.All other variants will not have this function and will be discontinued once we are sold out. (See photos) This touch sensor can be used for brightness adjustment with a tap and with a long press you can activate B/W mode, Pixel mode, and HD (regular) mode. The Black and White variants have been recently updated, and will now include a ribbon cable with a touch sensor attached.1x Ribbon Cable (Type of cable may vary, please see notes).1x IPS Backlight Screen with lens pre-adhered.Cloud SP Lens is pre adhered to the LCD, choose your color.One wire needs to be soldered from ribbon to motherboard for brightness function.Center screen installation, no offset display.Shell modification required if not using IPS Shell.
0 Comments
Leave a Reply. |